[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38.6-26.rc1.fc15.i686 (mockbuild@x86-14.phx2.fedoraproject.org) (gcc version 4.6.0 20110428 (Red Hat 4.6.0-6) (GCC) ) #1 SMP Mon May 9 20:43:14 UTC 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d6a1000 (usable) [ 0.000000] BIOS-e820: 000000007d6a1000 - 000000007d6a7000 (reserved) [ 0.000000] BIOS-e820: 000000007d6a7000 - 000000007d7bd000 (usable) [ 0.000000] BIOS-e820: 000000007d7bd000 - 000000007d80f000 (reserved) [ 0.000000] BIOS-e820: 000000007d80f000 - 000000007d908000 (usable) [ 0.000000] BIOS-e820: 000000007d908000 - 000000007db0f000 (reserved) [ 0.000000] BIOS-e820: 000000007db0f000 - 000000007db18000 (usable) [ 0.000000] BIOS-e820: 000000007db18000 - 000000007db1f000 (reserved) [ 0.000000] BIOS-e820: 000000007db1f000 - 000000007db64000 (usable) [ 0.000000] BIOS-e820: 000000007db64000 - 000000007db9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007db9f000 - 000000007dbe6000 (usable) [ 0.000000] BIOS-e820: 000000007dbe6000 - 000000007dbff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007dbff000 - 000000007dc00000 (usable) [ 0.000000] BIOS-e820: 000000007dc00000 - 000000007de00000 (reserved) [ 0.000000] BIOS-e820: 000000007e000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI present. [ 0.000000] DMI: Dell Inc. Vostro 1320/0T052J, BIOS A02 04/08/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7dc00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 07E000000 mask FFE000000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 0FFE40000 mask FFFFC0000 write-protect [ 0.000000] 3 base 07DE00000 mask FFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f6b20] f6b20 [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0036c00000 page 2M [ 0.000000] 0036c00000 - 0036ffe000 page 4k [ 0.000000] kernel direct mapping tables up to 36ffe000 @ ff9000-1000000 [ 0.000000] RAMDISK: 7cdc0000 - 7d6a0000 [ 0.000000] Allocated new RAMDISK: 3671e000 - 36ffd031 [ 0.000000] Move RAMDISK from 000000007cdc0000 - 000000007d69f030 to 3671e000 - 36ffd030 [ 0.000000] ACPI: RSDP 000f6a40 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 7dbf874d 0006C (v01 DELL CL09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7dbe8000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 7dbe9000 06318 (v02 Intel CANTIGA 06040000 INTL 20060608) [ 0.000000] ACPI: FACS 7db9efc0 00040 [ 0.000000] ACPI: HPET 7dbfed14 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 7dbfed4c 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: OSFR 7dbfed88 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000) [ 0.000000] ACPI: APIC 7dbfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7dbfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 7dbfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 7dbf87f1 000A3 (v01 BrtRef DD01BRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 7dbe7000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1132MB HIGHMEM available. [ 0.000000] 879MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 36ffe000 [ 0.000000] low ram: 0 - 36ffe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00036ffe [ 0.000000] HighMem 0x00036ffe -> 0x0007dc00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007d6a1 [ 0.000000] 0: 0x0007d6a7 -> 0x0007d7bd [ 0.000000] 0: 0x0007d80f -> 0x0007d908 [ 0.000000] 0: 0x0007db0f -> 0x0007db18 [ 0.000000] 0: 0x0007db1f -> 0x0007db64 [ 0.000000] 0: 0x0007db9f -> 0x0007dbe6 [ 0.000000] 0: 0x0007dbff -> 0x0007dc00 [ 0.000000] On node 0 totalpages: 514261 [ 0.000000] free_area_init_node: node 0, pgdat c0a49fc0, node_mem_map f5765200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 219454 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2265 pages used for memmap [ 0.000000] HighMem zone: 286831 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5000000 s27648 r0 d21504 u2097152 [ 0.000000] pcpu-alloc: s27648 r0 d21504 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510236 [ 0.000000] Kernel command line: initrd=/ubninit root=UUID=C001-93CC rootfstype=auto ro liveimg quiet rhgb rd.luks=0 rd.md=0 rd.dm=0 BOOT_IMAGE=/ubnkern [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 10301120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00036ffe:0007dc00) [ 0.000000] Memory: 2012748k/2060288k available (3953k kernel code, 44296k reserved, 2544k data, 568k init, 1156384k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff575000 - 0xfffff000 (10792 kB) [ 0.000000] pkmap : 0xff000000 - 0xff400000 (4096 kB) [ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB) [ 0.000000] .init : 0xc0a59000 - 0xc0ae7000 ( 568 kB) [ 0.000000] .data : 0xc07dc4de - 0xc0a58780 (2544 kB) [ 0.000000] .text : 0xc0400000 - 0xc07dc4de (3953 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 [ 0.000000] CPU 0 irqstacks, hard=f4020000 soft=f4022000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2094.768 MHz processor. [ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.53 BogoMIPS (lpj=2094768) [ 0.001007] pid_max: default: 32768 minimum: 301 [ 0.001194] Security Framework initialized [ 0.001203] SELinux: Initializing. [ 0.001230] SELinux: Starting in permissive mode [ 0.001360] Mount-cache hash table entries: 512 [ 0.002473] Initializing cgroup subsys ns [ 0.002478] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.002481] Initializing cgroup subsys cpuacct [ 0.002541] Initializing cgroup subsys memory [ 0.002568] Initializing cgroup subsys devices [ 0.002571] Initializing cgroup subsys freezer [ 0.002573] Initializing cgroup subsys net_cls [ 0.002576] Initializing cgroup subsys blkio [ 0.002648] CPU: Physical Processor ID: 0 [ 0.002650] CPU: Processor Core ID: 0 [ 0.002653] mce: CPU supports 6 MCE banks [ 0.002661] CPU0: Thermal monitoring enabled (TM2) [ 0.002665] using mwait in idle threads. [ 0.003246] ACPI: Core revision 20110112 [ 0.008014] ftrace: allocating 22972 entries in 45 pages [ 0.010053] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.010404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020620] CPU0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz stepping 0a [ 0.020998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.020998] ... version: 2 [ 0.020998] ... bit width: 40 [ 0.020998] ... generic registers: 2 [ 0.020998] ... value mask: 000000ffffffffff [ 0.020998] ... max period: 000000007fffffff [ 0.020998] ... fixed-purpose events: 3 [ 0.020998] ... event mask: 0000000700000003 [ 0.020998] NMI watchdog enabled, takes one hw-pmu counter. [ 0.020998] CPU 1 irqstacks, hard=f4108000 soft=f410a000 [ 0.020998] Booting Node 0, Processors #1 Ok. [ 0.001999] Initializing CPU#1 [ 0.092018] NMI watchdog enabled, takes one hw-pmu counter. [ 0.092060] Brought up 2 CPUs [ 0.092062] Total of 2 processors activated (8378.81 BogoMIPS). [ 0.093003] sizeof(vma)=88 bytes [ 0.093005] sizeof(page)=32 bytes [ 0.093007] sizeof(inode)=360 bytes [ 0.093008] sizeof(dentry)=128 bytes [ 0.093010] sizeof(ext3inode)=516 bytes [ 0.093011] sizeof(ext4inode)=608 bytes [ 0.093013] sizeof(buffer_head)=56 bytes [ 0.093015] sizeof(skbuff)=192 bytes [ 0.093016] sizeof(task_struct)=3212 bytes [ 0.093225] devtmpfs: initialized [ 0.094728] atomic64 test passed for i586+ platform with CX8 and with SSE [ 0.094767] Time: 14:43:49 Date: 09/11/11 [ 0.094901] NET: Registered protocol family 16 [ 0.095144] ACPI: bus type pci registered [ 0.095390] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.095394] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.095396] PCI: Using MMCONFIG for extended config space [ 0.095397] PCI: Using configuration type 1 for base access [ 0.095407] dmi type 0xB1 record - unknown flag [ 0.097107] bio: create slab at 0 [ 0.098842] ACPI: EC: Look up EC in DSDT [ 0.102256] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.107043] ACPI: SSDT 7db1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.107383] ACPI: Dynamic OEM Table Load: [ 0.107386] ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.107536] ACPI: SSDT 7db18620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.107856] ACPI: Dynamic OEM Table Load: [ 0.107859] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.113279] ACPI: SSDT 7db19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.113637] ACPI: Dynamic OEM Table Load: [ 0.113641] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.116095] ACPI: SSDT 7db19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.116429] ACPI: Dynamic OEM Table Load: [ 0.116432] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.119331] ACPI: Interpreter enabled [ 0.119337] ACPI: (supports S0 S3 S4 S5) [ 0.119360] ACPI: Using IOAPIC for interrupt routing [ 0.296150] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.299100] ACPI: No dock devices found. [ 0.299103] HEST: Table not found. [ 0.299106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.299511] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.300309] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.300312] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.300315] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.300318] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.300322] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] [ 0.300325] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.300339] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 [ 0.300364] DMAR: Forcing write-buffer flush capability [ 0.300366] DMAR: Disabling IOMMU for graphics on this chipset [ 0.300389] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300 [ 0.300403] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit] [ 0.300413] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.300420] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.300453] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380 [ 0.300466] pci 0000:00:02.1: reg 10: [mem 0xf6100000-0xf61fffff 64bit] [ 0.300558] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.300620] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] [ 0.300682] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.300745] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f] [ 0.300807] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.300870] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f] [ 0.300944] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.300977] pci 0000:00:1a.7: reg 10: [mem 0xf6504000-0xf65043ff] [ 0.301075] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.301082] pci 0000:00:1a.7: PME# disabled [ 0.301114] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.301138] pci 0000:00:1b.0: reg 10: [mem 0xf6500000-0xf6503fff 64bit] [ 0.301223] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.301228] pci 0000:00:1b.0: PME# disabled [ 0.301256] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.301344] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.301350] pci 0000:00:1c.0: PME# disabled [ 0.301381] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604 [ 0.301469] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.301474] pci 0000:00:1c.1: PME# disabled [ 0.301506] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604 [ 0.301593] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.301598] pci 0000:00:1c.2: PME# disabled [ 0.301630] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 [ 0.301718] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.301723] pci 0000:00:1c.3: PME# disabled [ 0.301754] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 [ 0.301843] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.301848] pci 0000:00:1c.4: PME# disabled [ 0.301879] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604 [ 0.301972] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.301977] pci 0000:00:1c.5: PME# disabled [ 0.302014] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.302076] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f] [ 0.302139] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.302202] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf] [ 0.302264] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.302326] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df] [ 0.302401] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.302429] pci 0000:00:1d.7: reg 10: [mem 0xf6504400-0xf65047ff] [ 0.302526] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.302531] pci 0000:00:1d.7: PME# disabled [ 0.302557] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.302646] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601 [ 0.302804] pci 0000:00:1f.2: [8086:2928] type 0 class 0x000101 [ 0.302828] pci 0000:00:1f.2: reg 10: [io 0x18f8-0x18ff] [ 0.302841] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f] [ 0.302853] pci 0000:00:1f.2: reg 18: [io 0x18f0-0x18f7] [ 0.302866] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b] [ 0.302879] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ef] [ 0.302891] pci 0000:00:1f.2: reg 24: [io 0x1810-0x181f] [ 0.302949] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.302978] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit] [ 0.303011] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.303062] pci 0000:00:1f.5: [8086:292d] type 0 class 0x000101 [ 0.303087] pci 0000:00:1f.5: reg 10: [io 0x1c50-0x1c57] [ 0.303099] pci 0000:00:1f.5: reg 14: [io 0x1c44-0x1c47] [ 0.303112] pci 0000:00:1f.5: reg 18: [io 0x1c48-0x1c4f] [ 0.303124] pci 0000:00:1f.5: reg 1c: [io 0x1c40-0x1c43] [ 0.303136] pci 0000:00:1f.5: reg 20: [io 0x1c30-0x1c3f] [ 0.303149] pci 0000:00:1f.5: reg 24: [io 0x1c20-0x1c2f] [ 0.303261] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.303267] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.303272] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.303280] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.303365] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200 [ 0.303389] pci 0000:08:00.0: reg 10: [io 0x3000-0x30ff] [ 0.303430] pci 0000:08:00.0: reg 18: [mem 0xf6004000-0xf6004fff 64bit pref] [ 0.303456] pci 0000:08:00.0: reg 20: [mem 0xf6000000-0xf6003fff 64bit pref] [ 0.303473] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.303529] pci 0000:08:00.0: supports D1 D2 [ 0.303531] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.303538] pci 0000:08:00.0: PME# disabled [ 0.304984] pci 0000:00:1c.1: PCI bridge to [bus 08-08] [ 0.304989] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.304995] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.305003] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf60fffff 64bit pref] [ 0.305128] pci 0000:0e:00.0: [8086:4232] type 0 class 0x000280 [ 0.305190] pci 0000:0e:00.0: reg 10: [mem 0xfa000000-0xfa001fff 64bit] [ 0.305377] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold [ 0.305404] pci 0000:0e:00.0: PME# disabled [ 0.307007] pci 0000:00:1c.2: PCI bridge to [bus 0e-0f] [ 0.307013] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.307018] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 0.307026] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.307089] pci 0000:00:1c.3: PCI bridge to [bus 14-15] [ 0.307094] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.307099] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfdffffff] [ 0.307108] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.307219] pci 0000:1a:00.0: [1217:10f7] type 0 class 0x000c00 [ 0.307276] pci 0000:1a:00.0: reg 10: [mem 0xf6200000-0xf6200fff] [ 0.307316] pci 0000:1a:00.0: reg 14: [mem 0xf6202000-0xf62027ff] [ 0.307600] pci 0000:1a:00.0: supports D1 D2 [ 0.307603] pci 0000:1a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.307616] pci 0000:1a:00.0: PME# disabled [ 0.307718] pci 0000:1a:00.1: [1217:8120] type 0 class 0x000805 [ 0.307775] pci 0000:1a:00.1: reg 10: [mem 0xf6203800-0xf62038ff] [ 0.308096] pci 0000:1a:00.1: supports D1 D2 [ 0.308098] pci 0000:1a:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.308111] pci 0000:1a:00.1: PME# disabled [ 0.308207] pci 0000:1a:00.2: [1217:8130] type 0 class 0x000180 [ 0.308263] pci 0000:1a:00.2: reg 10: [mem 0xf6201000-0xf6201fff] [ 0.308304] pci 0000:1a:00.2: reg 14: [mem 0xf6203000-0xf62037ff] [ 0.308344] pci 0000:1a:00.2: reg 18: [mem 0xf6202800-0xf6202fff] [ 0.308587] pci 0000:1a:00.2: supports D1 D2 [ 0.308589] pci 0000:1a:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.308602] pci 0000:1a:00.2: PME# disabled [ 0.308796] pci 0000:00:1c.4: PCI bridge to [bus 1a-1a] [ 0.308801] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.308807] pci 0000:00:1c.4: bridge window [mem 0xf6200000-0xf62fffff] [ 0.308815] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.308878] pci 0000:00:1c.5: PCI bridge to [bus 20-20] [ 0.308883] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled) [ 0.308889] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.308897] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.308997] pci 0000:00:1e.0: PCI bridge to [bus 26-26] (subtractive decode) [ 0.309003] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.309009] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.309017] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.309021] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.309024] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.309027] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.309029] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.309032] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode) [ 0.309035] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.309080] pci_bus 0000:00: on NUMA node 0 [ 0.309084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.309226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.309292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.309337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.309382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.309427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.309471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.309516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.309570] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.318462] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.318518] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.318572] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.318626] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.318679] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.318733] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.318787] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.318840] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.318931] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.318949] vgaarb: loaded [ 0.319115] SCSI subsystem initialized [ 0.319142] libata version 3.00 loaded. [ 0.319142] usbcore: registered new interface driver usbfs [ 0.319142] usbcore: registered new interface driver hub [ 0.319142] usbcore: registered new device driver usb [ 0.319142] PCI: Using ACPI for IRQ routing [ 0.319142] PCI: pci_cache_line_size set to 64 bytes [ 0.319199] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.319201] reserve RAM buffer: 000000007d6a1000 - 000000007fffffff [ 0.319207] reserve RAM buffer: 000000007d7bd000 - 000000007fffffff [ 0.319212] reserve RAM buffer: 000000007d908000 - 000000007fffffff [ 0.319216] reserve RAM buffer: 000000007db18000 - 000000007fffffff [ 0.319220] reserve RAM buffer: 000000007db64000 - 000000007fffffff [ 0.319224] reserve RAM buffer: 000000007dbe6000 - 000000007fffffff [ 0.319227] reserve RAM buffer: 000000007dc00000 - 000000007fffffff [ 0.319374] NetLabel: Initializing [ 0.319376] NetLabel: domain hash size = 128 [ 0.319378] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.319390] NetLabel: unlabeled traffic allowed by default [ 0.319397] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.319405] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.319410] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.321982] Switching to clocksource hpet [ 0.322836] Switched to NOHz mode on CPU #0 [ 0.322914] Switched to NOHz mode on CPU #1 [ 0.331470] pnp: PnP ACPI init [ 0.331498] ACPI: bus type pnp registered [ 0.331926] pnp 00:00: [bus 00-ff] [ 0.331930] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.331932] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.331935] pnp 00:00: [io 0x0d00-0xffff window] [ 0.331937] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.331940] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.331942] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.331945] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.331947] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.331950] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.331952] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.331955] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.331957] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.331960] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.331962] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.331965] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.331967] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.331970] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.331972] pnp 00:00: [mem 0x80000000-0xdfffffff window] [ 0.331975] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.331978] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.332069] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.398032] pnp 00:01: [io 0x0000-0x001f] [ 0.398035] pnp 00:01: [io 0x0081-0x0091] [ 0.398037] pnp 00:01: [io 0x0093-0x009f] [ 0.398040] pnp 00:01: [io 0x00c0-0x00df] [ 0.398042] pnp 00:01: [dma 4] [ 0.398080] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.398158] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.398239] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.398243] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.398256] pnp 00:03: [io 0x00f0] [ 0.398267] pnp 00:03: [irq 13] [ 0.398303] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.398316] pnp 00:04: [io 0x002e-0x002f] [ 0.398318] pnp 00:04: [io 0x0061] [ 0.398320] pnp 00:04: [io 0x0063] [ 0.398322] pnp 00:04: [io 0x0065] [ 0.398324] pnp 00:04: [io 0x0067] [ 0.398326] pnp 00:04: [io 0x0070] [ 0.398328] pnp 00:04: [io 0x0080] [ 0.398330] pnp 00:04: [io 0x0092] [ 0.398332] pnp 00:04: [io 0x00b2-0x00b3] [ 0.398335] pnp 00:04: [io 0x0480-0x048f] [ 0.398337] pnp 00:04: [io 0xffff] [ 0.398339] pnp 00:04: [io 0xffff] [ 0.398341] pnp 00:04: [io 0x0400-0x047f] [ 0.398343] pnp 00:04: [io 0x1180-0x11ff] [ 0.398345] pnp 00:04: [io 0xfe00] [ 0.398347] pnp 00:04: [io 0xff2c-0xff7f] [ 0.398432] system 00:04: [io 0x0480-0x048f] has been reserved [ 0.398435] system 00:04: [io 0xffff] has been reserved [ 0.398438] system 00:04: [io 0xffff] has been reserved [ 0.398441] system 00:04: [io 0x0400-0x047f] has been reserved [ 0.398444] system 00:04: [io 0x1180-0x11ff] has been reserved [ 0.398447] system 00:04: [io 0xfe00] has been reserved [ 0.398450] system 00:04: [io 0xff2c-0xff7f] has been reserved [ 0.398453] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.398464] pnp 00:05: [io 0x0070-0x0077] [ 0.398469] pnp 00:05: [irq 8] [ 0.398508] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.398521] pnp 00:06: [io 0x0060] [ 0.398523] pnp 00:06: [io 0x0064] [ 0.398528] pnp 00:06: [irq 1] [ 0.398564] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.398578] pnp 00:07: [irq 12] [ 0.398616] pnp 00:07: Plug and Play ACPI device, IDs SYN070b SYN0700 SYN0002 PNP0f13 (active) [ 0.398707] pnp 00:08: [mem 0xf6203900-0xf6203bff] [ 0.398722] pnp 00:08: disabling [mem 0xf6203900-0xf6203bff] because it overlaps 0000:00:1c.4 BAR 14 [mem 0xf6200000-0xf62fffff] [ 0.398782] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.398889] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.398894] pnp 00:09: [mem 0xfed10000-0xfed13fff] [ 0.398896] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 0.398899] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 0.398901] pnp 00:09: [mem 0xe0000000-0xefffffff] [ 0.398903] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.398905] pnp 00:09: [mem 0xfed40000-0xfed44fff] [ 0.398908] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 0.398985] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.398988] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.398991] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.398994] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.398997] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.399013] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.399016] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.399019] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.399023] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.399190] pnp: PnP ACPI: found 10 devices [ 0.399192] ACPI: ACPI bus type pnp unregistered [ 0.436348] pci 0000:00:1c.1: BAR 14: assigned [mem 0x80000000-0x803fffff] [ 0.436354] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] [ 0.436358] pci 0000:00:1c.5: BAR 14: assigned [mem 0x80600000-0x807fffff] [ 0.436363] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref] [ 0.436367] pci 0000:00:1c.4: BAR 13: assigned [io 0x6000-0x6fff] [ 0.436371] pci 0000:00:1c.5: BAR 13: assigned [io 0x7000-0x7fff] [ 0.436376] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80a00000-0x80a000ff 64bit] [ 0.436385] pci 0000:00:1f.3: BAR 0: set to [mem 0x80a00000-0x80a000ff 64bit] (PCI address [0x80a00000-0x80a000ff]) [ 0.436389] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.436393] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.436400] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.436405] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.436415] pci 0000:08:00.0: BAR 6: assigned [mem 0xf6020000-0xf603ffff pref] [ 0.436417] pci 0000:00:1c.1: PCI bridge to [bus 08-08] [ 0.436421] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.436428] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x803fffff] [ 0.436433] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf60fffff 64bit pref] [ 0.436442] pci 0000:00:1c.2: PCI bridge to [bus 0e-0f] [ 0.436445] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.436452] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 0.436457] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.436466] pci 0000:00:1c.3: PCI bridge to [bus 14-15] [ 0.436470] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.436476] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfdffffff] [ 0.436481] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.436490] pci 0000:00:1c.4: PCI bridge to [bus 1a-1a] [ 0.436494] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.436501] pci 0000:00:1c.4: bridge window [mem 0xf6200000-0xf62fffff] [ 0.436506] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 0.436514] pci 0000:00:1c.5: PCI bridge to [bus 20-20] [ 0.436518] pci 0000:00:1c.5: bridge window [io 0x7000-0x7fff] [ 0.436525] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff] [ 0.436530] pci 0000:00:1c.5: bridge window [mem 0x80800000-0x809fffff 64bit pref] [ 0.436539] pci 0000:00:1e.0: PCI bridge to [bus 26-26] [ 0.436541] pci 0000:00:1e.0: bridge window [io disabled] [ 0.436547] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.436552] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.436569] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.436576] pci 0000:00:1c.0: setting latency timer to 64 [ 0.436585] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.436591] pci 0000:00:1c.1: setting latency timer to 64 [ 0.436600] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.436605] pci 0000:00:1c.2: setting latency timer to 64 [ 0.436614] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.436620] pci 0000:00:1c.3: setting latency timer to 64 [ 0.436628] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.436633] pci 0000:00:1c.4: setting latency timer to 64 [ 0.436641] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.436646] pci 0000:00:1c.5: setting latency timer to 64 [ 0.436655] pci 0000:00:1e.0: setting latency timer to 64 [ 0.436659] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.436662] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.436664] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.436667] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.436670] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff] [ 0.436672] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.436675] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.436677] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.436680] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.436683] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] [ 0.436685] pci_bus 0000:08: resource 1 [mem 0x80000000-0x803fffff] [ 0.436688] pci_bus 0000:08: resource 2 [mem 0xf6000000-0xf60fffff 64bit pref] [ 0.436691] pci_bus 0000:0e: resource 0 [io 0x4000-0x4fff] [ 0.436693] pci_bus 0000:0e: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.436696] pci_bus 0000:0e: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.436698] pci_bus 0000:14: resource 0 [io 0x5000-0x5fff] [ 0.436701] pci_bus 0000:14: resource 1 [mem 0xfc000000-0xfdffffff] [ 0.436703] pci_bus 0000:14: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.436706] pci_bus 0000:1a: resource 0 [io 0x6000-0x6fff] [ 0.436708] pci_bus 0000:1a: resource 1 [mem 0xf6200000-0xf62fffff] [ 0.436711] pci_bus 0000:1a: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.436714] pci_bus 0000:20: resource 0 [io 0x7000-0x7fff] [ 0.436716] pci_bus 0000:20: resource 1 [mem 0x80600000-0x807fffff] [ 0.436719] pci_bus 0000:20: resource 2 [mem 0x80800000-0x809fffff 64bit pref] [ 0.436721] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7] [ 0.436724] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff] [ 0.436726] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff] [ 0.436729] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.436731] pci_bus 0000:26: resource 8 [mem 0x80000000-0xdfffffff] [ 0.436734] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.436814] NET: Registered protocol family 2 [ 0.436927] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.437162] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.437590] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.437780] TCP: Hash tables configured (established 131072 bind 65536) [ 0.437783] TCP reno registered [ 0.437786] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.437794] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.438157] NET: Registered protocol family 1 [ 0.438174] pci 0000:00:02.0: Boot video device [ 0.438408] PCI: CLS 64 bytes, default 64 [ 0.438465] Trying to unpack rootfs image as initramfs... [ 0.694703] Freeing initrd memory: 9088k freed [ 0.699207] Simple Boot Flag at 0x36 set to 0x1 [ 0.699628] apm: BIOS not found. [ 0.699844] audit: initializing netlink socket (disabled) [ 0.699857] type=2000 audit(1315752229.698:1): initialized [ 0.709393] highmem bounce pool size: 64 pages [ 0.709401] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.711648] VFS: Disk quotas dquot_6.5.2 [ 0.711871] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.712884] msgmni has been set to 1690 [ 0.713013] SELinux: Registering netfilter hooks [ 0.713358] NET: Registered protocol family 38 [ 0.713428] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.713478] io scheduler noop registered [ 0.713480] io scheduler deadline registered [ 0.713496] io scheduler cfq registered (default) [ 0.713609] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.713667] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.713755] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.713808] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.713897] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.713950] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.714048] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.714101] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.714187] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.714240] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.714325] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.714378] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X [ 0.714491] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.714537] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.714540] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.714968] intel_idle: MWAIT substates: 0x3122220 [ 0.714970] intel_idle: does not run on family 6 model 23 [ 0.780024] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.842034] ACPI: AC Adapter [ACAD] (on-line) [ 0.842149] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.842206] ACPI: Lid Switch [LID0] [ 0.842260] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.842264] ACPI: Power Button [PWRB] [ 0.842319] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.842323] ACPI: Sleep Button [SLPB] [ 0.842376] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.842380] ACPI: Power Button [PWRF] [ 0.842590] ACPI: acpi_idle registered with cpuidle [ 0.846978] Monitor-Mwait will be used to enter C-1 state [ 0.847018] Monitor-Mwait will be used to enter C-2 state [ 0.847048] Monitor-Mwait will be used to enter C-3 state [ 0.847056] Marking TSC unstable due to TSC halts in idle [ 0.918864] ERST: Table is not found! [ 0.918898] isapnp: Scanning for PnP cards... [ 1.276405] isapnp: No Plug & Play device found [ 1.276487] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.343111] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.343118] ACPI: Battery Slot [BAT1] (battery present) [ 1.343249] Non-volatile memory driver v1.3 [ 1.343252] Linux agpgart interface v0.103 [ 1.343416] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 1.343563] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.344639] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.344771] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.347145] brd: module loaded [ 1.347846] loop: module loaded [ 1.347971] ata_piix 0000:00:1f.2: version 2.13 [ 1.347986] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.347994] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 1.348051] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.348370] scsi0 : ata_piix [ 1.348479] scsi1 : ata_piix [ 1.348542] ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19 [ 1.348547] ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19 [ 1.348587] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.348600] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.348640] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.348939] scsi2 : ata_piix [ 1.349035] scsi3 : ata_piix [ 1.349093] ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19 [ 1.349098] ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19 [ 1.349180] Fixed MDIO Bus: probed [ 1.349237] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.349253] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.349269] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.349273] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.349331] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.351068] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.354963] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.354970] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf6504000 [ 1.364018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.364038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.364041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.364044] usb usb1: Product: EHCI Host Controller [ 1.364046] usb usb1: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ehci_hcd [ 1.364048] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.364164] hub 1-0:1.0: USB hub found [ 1.364169] hub 1-0:1.0: 6 ports detected [ 1.364269] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.364282] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.364285] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.364351] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.364404] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.368299] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.368315] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6504400 [ 1.378018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.378054] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.378057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.378059] usb usb2: Product: EHCI Host Controller [ 1.378062] usb usb2: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ehci_hcd [ 1.378064] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.378175] hub 2-0:1.0: USB hub found [ 1.378179] hub 2-0:1.0: 6 ports detected [ 1.378278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.378293] uhci_hcd: USB Universal Host Controller Interface driver [ 1.378316] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.378323] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.378327] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.378377] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.378434] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.378469] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.378472] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.378474] usb usb3: Product: UHCI Host Controller [ 1.378476] usb usb3: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd [ 1.378479] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.378587] hub 3-0:1.0: USB hub found [ 1.378591] hub 3-0:1.0: 2 ports detected [ 1.378680] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.378687] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.378691] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.378742] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.378799] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 1.378834] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.378837] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.378839] usb usb4: Product: UHCI Host Controller [ 1.378842] usb usb4: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd [ 1.378844] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.378956] hub 4-0:1.0: USB hub found [ 1.378960] hub 4-0:1.0: 2 ports detected [ 1.379065] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.379071] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.379075] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.379127] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.379174] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 [ 1.379209] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.379211] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.379214] usb usb5: Product: UHCI Host Controller [ 1.379216] usb usb5: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd [ 1.379218] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.379324] hub 5-0:1.0: USB hub found [ 1.379328] hub 5-0:1.0: 2 ports detected [ 1.379417] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.379424] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.379428] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.379473] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.379520] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 1.379554] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.379557] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.379559] usb usb6: Product: UHCI Host Controller [ 1.379562] usb usb6: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd [ 1.379564] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.379670] hub 6-0:1.0: USB hub found [ 1.379674] hub 6-0:1.0: 2 ports detected [ 1.379760] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.379766] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.379770] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.379815] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.379861] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 1.379898] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.379901] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.379903] usb usb7: Product: UHCI Host Controller [ 1.379905] usb usb7: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd [ 1.379908] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.380027] hub 7-0:1.0: USB hub found [ 1.380031] hub 7-0:1.0: 2 ports detected [ 1.380119] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.380126] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.380129] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.380175] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.380231] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 1.380265] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.380268] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.380270] usb usb8: Product: UHCI Host Controller [ 1.380272] usb usb8: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd [ 1.380274] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.380382] hub 8-0:1.0: USB hub found [ 1.380386] hub 8-0:1.0: 2 ports detected [ 1.380529] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.412320] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.412327] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.412442] mousedev: PS/2 mouse device common for all mice [ 1.415083] rtc_cmos 00:05: RTC can wake from S4 [ 1.418073] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.418105] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.418193] device-mapper: uevent: version 1.0.3 [ 1.418280] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.418389] cpuidle: using governor ladder [ 1.418501] cpuidle: using governor menu [ 1.418682] usbcore: registered new interface driver usbhid [ 1.418684] usbhid: USB HID core driver [ 1.418702] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.418890] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.418902] TCP cubic registered [ 1.418903] Initializing XFRM netlink socket [ 1.418912] NET: Registered protocol family 17 [ 1.418928] Registering the dns_resolver key type [ 1.418944] Using IPI No-Shortcut mode [ 1.419069] PM: Hibernation image not present or could not be loaded. [ 1.419082] registered taskstats version 1 [ 1.419155] IMA: No TPM chip found, activating TPM-bypass! [ 1.419753] Magic number: 11:14:738 [ 1.419848] rtc_cmos 00:05: setting system clock to 2011-09-11 14:43:50 UTC (1315752230) [ 1.419922] Initalizing network drop monitor service [ 1.438359] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.666254] ata4: SATA link down (SStatus 0 SControl 300) [ 1.677483] ata3: SATA link down (SStatus 0 SControl 300) [ 1.680040] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 1.804426] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.804549] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.826222] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, D300, max UDMA/100 [ 1.826229] ata2.00: applying bridge limits [ 1.841157] usb 2-2: New USB device found, idVendor=0c45, idProduct=63e0 [ 1.841162] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1.841167] usb 2-2: Product: Integrated Webcam [ 1.841170] usb 2-2: Manufacturer: SuYin [ 1.841174] usb 2-2: SerialNumber: CN1315-S30B-OV01-VD-B20090413 [ 1.852184] ata2.00: configured for UDMA/100 [ 1.856480] ata1.00: ATA-8: WDC WD1600BEVT-75ZCT2, 11.01A11, max UDMA/133 [ 1.856485] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.862823] ata1.00: configured for UDMA/133 [ 1.863047] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-7 11.0 PQ: 0 ANSI: 5 [ 1.863302] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.863306] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.863362] sd 0:0:0:0: [sda] Write Protect is off [ 1.863365] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.863393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.869853] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C D300 PQ: 0 ANSI: 5 [ 1.876919] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.876924] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.877129] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.877199] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.921839] sda: sda1 sda2 sda3 sda4 [ 1.922437] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.922483] Freeing unused kernel memory: 568k freed [ 1.922782] Write protecting the kernel text: 3956k [ 1.922824] Write protecting the kernel read-only data: 1912k [ 1.946045] usb 2-3: new high speed USB device using ehci_hcd and address 3 [ 1.959558] dracut: dracut-009-10.fc15 [ 1.969092] dracut: rd.luks=0: removing cryptoluks activation [ 1.970564] dracut: root was live:/dev/disk/by-uuid/C001-93CC, liveroot is now live:UUID=C001-93CC [ 1.979312] udev[119]: starting version 167 [ 2.050116] [drm] Initialized drm 1.1.0 20060810 [ 2.060893] usb 2-3: New USB device found, idVendor=0781, idProduct=5567 [ 2.060897] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.060900] usb 2-3: Product: Cruzer Blade [ 2.060903] usb 2-3: Manufacturer: SanDisk [ 2.060905] usb 2-3: SerialNumber: 200608766113C0E0EE11 [ 2.075992] Initializing USB Mass Storage driver... [ 2.077525] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.077531] i915 0000:00:02.0: setting latency timer to 64 [ 2.078424] scsi4 : usb-storage 2-3:1.0 [ 2.079070] usbcore: registered new interface driver usb-storage [ 2.079073] USB Mass Storage support registered. [ 2.117988] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 2.117995] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.117997] [drm] Driver supports precise vblank timestamp query. [ 2.139513] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5 [ 2.177751] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 2.198807] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.199137] fixme: max PWM is zero. [ 2.410108] usb 8-1: new full speed USB device using uhci_hcd and address 2 [ 2.570331] usb 8-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 2.570337] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.570341] usb 8-1: Product: BCM2045B2 [ 2.570344] usb 8-1: Manufacturer: Broadcom [ 2.572407] hub 8-1:1.0: USB hub found [ 2.574330] hub 8-1:1.0: 3 ports detected [ 2.633322] fbcon: inteldrmfb (fb0) is primary device [ 2.641897] Console: switching to colour frame buffer device 160x50 [ 2.646636] fb0: inteldrmfb frame buffer device [ 2.646638] drm: registered panic notifier [ 2.663169] acpi device:06: registered as cooling_device2 [ 2.663472] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 2.663569] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.663758] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.715479] dracut: Starting plymouth daemon [ 2.818687] dracut: rd.dm=0: removing DM RAID activation [ 2.821455] dracut: rd.md=0: removing MD RAID activation [ 2.851334] usb 8-1.1: new full speed USB device using uhci_hcd and address 3 [ 2.966325] usb 8-1.1: New USB device found, idVendor=413c, idProduct=8126 [ 2.966329] usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.966332] usb 8-1.1: Product: BCM2045 [ 2.966334] usb 8-1.1: Manufacturer: Broadcom Corp [ 3.039023] usb 8-1.2: new full speed USB device using uhci_hcd and address 4 [ 3.081581] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2 [ 3.082227] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.082686] sd 4:0:0:0: [sdb] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 3.084063] sd 4:0:0:0: [sdb] Write Protect is off [ 3.084067] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 3.084806] sd 4:0:0:0: [sdb] No Caching mode page present [ 3.084809] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 3.088059] sd 4:0:0:0: [sdb] No Caching mode page present [ 3.088063] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 3.088821] sdb: sdb1 [ 3.091433] sd 4:0:0:0: [sdb] No Caching mode page present [ 3.091436] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 3.091439] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 3.140232] firewire_ohci 0000:1a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.140248] firewire_ohci 0000:1a:00.0: setting latency timer to 64 [ 3.145208] sdhci: Secure Digital Host Controller Interface driver [ 3.145211] sdhci: Copyright(c) Pierre Ossman [ 3.164339] usb 8-1.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 3.164345] usb 8-1.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 3.164350] usb 8-1.2: Manufacturer: Broadcom Corp [ 3.172212] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.2/8-1.2:1.0/input/input8 [ 3.172316] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-1.2/input0 [ 3.191287] firewire_ohci: Added fw-ohci device 0000:1a:00.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0 [ 3.191407] sdhci-pci 0000:1a:00.1: SDHCI controller found [1217:8120] (rev 1) [ 3.191439] sdhci-pci 0000:1a:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.191484] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.191499] sdhci-pci 0000:1a:00.1: setting latency timer to 64 [ 3.191840] Registered led device: mmc0:: [ 3.191971] mmc0: SDHCI controller on PCI [0000:1a:00.1] using DMA [ 3.239346] usb 8-1.3: new full speed USB device using uhci_hcd and address 5 [ 3.363340] usb 8-1.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 3.363344] usb 8-1.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 3.363347] usb 8-1.3: Manufacturer: Broadcom Corp [ 3.371783] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.3/8-1.3:1.0/input/input9 [ 3.371928] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-1.3/input0 [ 3.692197] firewire_core: created device fw0: GUID 00000010a000b000, S400 [ 4.605063] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.365287] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 5.372225] dracut: Mounted root filesystem /dev/mapper/live-rw [ 5.459856] dracut: Switching root [ 5.860998] type=1404 audit(1315752234.939:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 6.095659] SELinux: 2048 avtab hash slots, 220448 rules. [ 6.179393] SELinux: 2048 avtab hash slots, 220448 rules. [ 6.469579] SELinux: 9 users, 13 roles, 3606 types, 191 bools, 1 sens, 1024 cats [ 6.469584] SELinux: 81 classes, 220448 rules [ 6.477943] SELinux: Completing initialization. [ 6.477945] SELinux: Setting up existing superblocks. [ 6.477953] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 6.477960] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 6.477977] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 6.477984] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 6.477992] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 6.478045] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 6.478619] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 6.478624] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 6.480032] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 6.480040] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 6.480045] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 6.480060] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 6.480079] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 6.480101] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 6.480122] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 6.480137] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 6.480142] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 6.480846] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 6.480853] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 6.481268] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts [ 6.481274] SELinux: initialized (dev loop0, type squashfs), not configured for labeling [ 6.481278] SELinux: initialized (dev loop2, type squashfs), not configured for labeling [ 6.481291] SELinux: initialized (dev dm-0, type ext4), uses xattr [ 6.485378] type=1403 audit(1315752235.564:3): policy loaded auid=4294967295 ses=4294967295 [ 6.663753] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 6.664406] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.888950] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.891188] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.891639] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.894160] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.898147] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.898618] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.901161] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.905124] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.905633] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.929234] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora) [ 7.078415] NET: Registered protocol family 10 [ 7.079054] systemd[1]: Set hostname to . [ 7.702073] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 7.703293] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 7.703739] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 7.711100] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 7.711417] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 7.819670] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.826191] systemd-fsck[494]: Root directory is writable, skipping check. [ 8.075397] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 8.489516] udev[514]: starting version 167 [ 9.095404] iTCO_vendor_support: vendor-support=0 [ 9.151943] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 9.151950] ACPI: resource 0000:00:1f.3 [io 0x1c00-0x1c1f] conflicts with ACPI region SMBI [io 0x1c00-0x1c0f] [ 9.151952] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.186623] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 9.187532] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 9.188525] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.220060] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 9.226654] mtp-probe[680]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3" [ 9.226947] mtp-probe[668]: checking bus 8, device 5: "/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.3" [ 9.230902] mtp-probe[669]: checking bus 8, device 4: "/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.2" [ 9.247577] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 9.247585] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 9.249126] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 9.306766] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.306796] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.306856] r8169 0000:08:00.0: setting latency timer to 64 [ 9.306927] r8169 0000:08:00.0: irq 47 for MSI/MSI-X [ 9.309191] r8169 0000:08:00.0: eth0: RTL8168d/8111d at 0xf92a6000, 00:24:e8:be:f7:70, XID 081000c0 IRQ 47 [ 9.315679] Bluetooth: Core ver 2.15 [ 9.316045] NET: Registered protocol family 31 [ 9.316047] Bluetooth: HCI device and connection manager initialized [ 9.316050] Bluetooth: HCI socket layer initialized [ 9.362045] Linux video capture interface: v2.00 [ 9.442091] cfg80211: Calling CRDA to update world regulatory domain [ 9.458168] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 9.476236] usbcore: registered new interface driver btusb [ 9.517747] uvcvideo: Found UVC 1.00 device Integrated Webcam (0c45:63e0) [ 9.530605] mtp-probe[680]: bus: 2, device: 3 was not an MTP device [ 9.533728] mtp-probe[668]: bus: 8, device: 5 was not an MTP device [ 9.533808] mtp-probe[669]: bus: 8, device: 4 was not an MTP device [ 9.551334] input: Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input10 [ 9.551810] usbcore: registered new interface driver uvcvideo [ 9.551813] USB Video Class driver (v1.0.0) [ 9.798100] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.798166] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 9.798197] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.810643] cfg80211: World regulatory domain updated: [ 9.810647] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.810651] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.810654] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.810657] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.810660] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.810663] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.818005] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 [ 9.845003] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 [ 9.865280] ALSA sound/pci/hda/hda_codec.c:4633: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 9.865285] ALSA sound/pci/hda/hda_codec.c:4637: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.865288] ALSA sound/pci/hda/hda_codec.c:4641: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 9.865292] ALSA sound/pci/hda/hda_codec.c:4642: mono: mono_out=0x0 [ 9.865295] ALSA sound/pci/hda/hda_codec.c:4646: inputs: [ 9.865297] ALSA sound/pci/hda/hda_codec.c:4652: [ 9.865513] ALSA sound/pci/hda/patch_sigmatel.c:3073: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0) [ 9.873680] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.873899] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 9.903597] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 9.903600] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 9.903709] iwlagn 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.903719] iwlagn 0000:0e:00.0: setting latency timer to 64 [ 9.903758] iwlagn 0000:0e:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 9.926030] iwlagn 0000:0e:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 9.926033] iwlagn 0000:0e:00.0: Device SKU: 0Xb [ 9.944114] iwlagn 0000:0e:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 9.944197] iwlagn 0000:0e:00.0: irq 49 for MSI/MSI-X [ 10.069354] iwlagn 0000:0e:00.0: loaded firmware version 8.83.5.1 build 33692 [ 10.112540] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 10.475177] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 14.299149] Adding 4194300k swap on /dev/mapper/vg_aerrith-lv_swap. Priority:-1 extents:1 across:4194300k [ 14.320733] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 14.323492] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 14.325373] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 14.989283] r8169 0000:08:00.0: eth0: link down [ 14.989292] r8169 0000:08:00.0: eth0: link down [ 14.989659] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.580238] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 17.009794] auditd (1091): /proc/1091/oom_adj is deprecated, please use /proc/1091/oom_score_adj instead. [ 17.652732] 802.1Q VLAN Support v1.8 Ben Greear [ 17.652735] All bugs added by David S. Miller [ 17.673764] r8169 0000:08:00.0: eth0: link up [ 17.676151] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.221912] fuse init (API version 7.16) [ 21.236423] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 21.278943] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [ 28.578054] eth0: no IPv6 routers present [ 47.948846] iwlagn 0000:0e:00.0: RF_KILL bit toggled to disable radio. [ 47.952133] keyboard: can't emulate rawmode for keycode 240 [ 47.952154] keyboard: can't emulate rawmode for keycode 240 [ 50.704304] usb 8-1: USB disconnect, address 2 [ 50.704310] usb 8-1.1: USB disconnect, address 3 [ 50.705938] usb 8-1.2: USB disconnect, address 4 [ 50.721173] usb 8-1.3: USB disconnect, address 5 [ 53.660652] iwlagn 0000:0e:00.0: RF_KILL bit toggled to enable radio. [ 53.664175] keyboard: can't emulate rawmode for keycode 240 [ 53.664194] keyboard: can't emulate rawmode for keycode 240 [ 54.067272] usb 8-1: new full speed USB device using uhci_hcd and address 6 [ 54.229495] usb 8-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 54.229502] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 54.229507] usb 8-1: Product: BCM2045B2 [ 54.229510] usb 8-1: Manufacturer: Broadcom [ 54.236402] hub 8-1:1.0: USB hub found [ 54.238305] hub 8-1:1.0: 3 ports detected [ 54.516504] usb 8-1.1: new full speed USB device using uhci_hcd and address 7 [ 54.628504] usb 8-1.1: New USB device found, idVendor=413c, idProduct=8126 [ 54.628510] usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 54.628515] usb 8-1.1: Product: BCM2045 [ 54.628519] usb 8-1.1: Manufacturer: Broadcom Corp [ 54.702508] usb 8-1.2: new full speed USB device using uhci_hcd and address 8 [ 54.833509] usb 8-1.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 54.833515] usb 8-1.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 54.833520] usb 8-1.2: Manufacturer: Broadcom Corp [ 54.841102] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.2/8-1.2:1.0/input/input13 [ 54.841352] generic-usb 0003:0A5C:4502.0003: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-1.2/input0 [ 54.907331] usb 8-1.3: new full speed USB device using uhci_hcd and address 9 [ 55.025519] usb 8-1.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 55.025526] usb 8-1.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 55.025531] usb 8-1.3: Manufacturer: Broadcom Corp [ 55.032884] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.3/8-1.3:1.0/input/input14 [ 55.033206] generic-usb 0003:0A5C:4503.0004: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-1.3/input0 [ 161.892592] iwlagn 0000:0e:00.0: RF_KILL bit toggled to disable radio. [ 161.896952] keyboard: can't emulate rawmode for keycode 240 [ 161.896972] keyboard: can't emulate rawmode for keycode 240 [ 164.704323] usb 8-1: USB disconnect, address 6 [ 164.704329] usb 8-1.1: USB disconnect, address 7 [ 164.705891] usb 8-1.2: USB disconnect, address 8 [ 164.717224] usb 8-1.3: USB disconnect, address 9 [ 177.578907] iwlagn 0000:0e:00.0: RF_KILL bit toggled to enable radio. [ 177.582472] keyboard: can't emulate rawmode for keycode 240 [ 177.582492] keyboard: can't emulate rawmode for keycode 240 [ 177.985271] usb 8-1: new full speed USB device using uhci_hcd and address 10 [ 178.145334] usb 8-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 178.145341] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 178.145346] usb 8-1: Product: BCM2045B2 [ 178.145349] usb 8-1: Manufacturer: Broadcom [ 178.148434] hub 8-1:1.0: USB hub found [ 178.150341] hub 8-1:1.0: 3 ports detected [ 178.427353] usb 8-1.1: new full speed USB device using uhci_hcd and address 11 [ 178.538536] usb 8-1.1: New USB device found, idVendor=413c, idProduct=8126 [ 178.538542] usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 178.538547] usb 8-1.1: Product: BCM2045 [ 178.538551] usb 8-1.1: Manufacturer: Broadcom Corp [ 178.608540] usb 8-1.2: new full speed USB device using uhci_hcd and address 12 [ 178.753355] usb 8-1.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 178.753361] usb 8-1.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 178.753366] usb 8-1.2: Manufacturer: Broadcom Corp [ 178.761175] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.2/8-1.2:1.0/input/input15 [ 178.761399] generic-usb 0003:0A5C:4502.0005: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-1.2/input0 [ 178.827360] usb 8-1.3: new full speed USB device using uhci_hcd and address 13 [ 178.947548] usb 8-1.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 178.947554] usb 8-1.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 178.947560] usb 8-1.3: Manufacturer: Broadcom Corp [ 178.954749] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.3/8-1.3:1.0/input/input16 [ 178.955101] generic-usb 0003:0A5C:4503.0006: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-1.3/input0 [ 273.287621] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 319.904843] iwlagn 0000:0e:00.0: RF_KILL bit toggled to disable radio. [ 319.908190] keyboard: can't emulate rawmode for keycode 240 [ 319.908209] keyboard: can't emulate rawmode for keycode 240 [ 319.914187] iwlagn 0000:0e:00.0: Not sending command - RF KILL [ 319.914194] iwlagn 0000:0e:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [ 319.914200] iwlagn 0000:0e:00.0: Error clearing ASSOC_MSK on BSS (-5) [ 322.500293] usb 8-1: USB disconnect, address 10 [ 322.500299] usb 8-1.1: USB disconnect, address 11 [ 322.501459] usb 8-1.2: USB disconnect, address 12 [ 322.513197] usb 8-1.3: USB disconnect, address 13 [ 324.612030] iwlagn 0000:0e:00.0: RF_KILL bit toggled to enable radio. [ 324.615322] keyboard: can't emulate rawmode for keycode 240 [ 324.615340] keyboard: can't emulate rawmode for keycode 240 [ 325.040258] usb 8-1: new full speed USB device using uhci_hcd and address 14 [ 325.200583] usb 8-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 325.200590] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 325.200595] usb 8-1: Product: BCM2045B2 [ 325.200598] usb 8-1: Manufacturer: Broadcom [ 325.203689] hub 8-1:1.0: USB hub found [ 325.205582] hub 8-1:1.0: 3 ports detected [ 325.482778] usb 8-1.1: new full speed USB device using uhci_hcd and address 15 [ 325.598595] usb 8-1.1: New USB device found, idVendor=413c, idProduct=8126 [ 325.598602] usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 325.598607] usb 8-1.1: Product: BCM2045 [ 325.598611] usb 8-1.1: Manufacturer: Broadcom Corp [ 325.668602] usb 8-1.2: new full speed USB device using uhci_hcd and address 16 [ 325.786601] usb 8-1.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 325.786607] usb 8-1.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 325.786613] usb 8-1.2: Manufacturer: Broadcom Corp [ 325.793478] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.2/8-1.2:1.0/input/input17 [ 325.793713] generic-usb 0003:0A5C:4502.0007: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-1.2/input0 [ 325.859608] usb 8-1.3: new full speed USB device using uhci_hcd and address 17 [ 325.979607] usb 8-1.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 325.979614] usb 8-1.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 325.979619] usb 8-1.3: Manufacturer: Broadcom Corp [ 325.987520] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.3/8-1.3:1.0/input/input18 [ 325.987841] generic-usb 0003:0A5C:4503.0008: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-1.3/input0